home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Atari Compendium
/
The Atari Compendium (Toad Computers) (1994).iso
/
files
/
umich
/
telecomm
/
st_term.lzh
/
READ.ME
< prev
next >
Wrap
Text File
|
1991-02-09
|
4KB
|
110 lines
Our Addess is now:
Commnet Systems
50 Eaton Road
Framingham, MA 01701
617-877-0257
ST-Term 3.5
The 4 drive access limit has been changed to 16 drives
Upon connection from the auto-dial, if the connection baud rate
is different from the baud rate in the autodial file then the baud
rate is changed to the connected baud rate.
ST-Term 3.3 features
ST-TERM now support SEAlink and Fmodem protocols.
ST-TERM.INI This file is a list of commands to send to the mdem
when the program is booted.
ST-TERM.EDI ST-TERM can now call any TOS editor to edit a file or
the capture buffer. Use CONTRL-ESC to edit the capture buffer
or ALT-ESC to edit a file. The file ST-TERM.EDI contains one
line which is the full path name for the editor to run.
Information on ST-TERM 2.2 additions
Additional Terminal Mode Keys. Press ALT-H for list.
Sequence Dialing. You can now tell ST-TERM to dial up to 9 numbers
until it connects with one of them.
Information on ST-TERM 2.1 additions
New enhancements include:
VT 100 emulation
User set screen/text colors
Full status screen
64k capture buffer
Double sided disk format
Wildcard copies
Enhanced Autodialer
Xmodem CRC
Ymodem and Ymodem Batch protocols
This file contains information about ST-TERM version 2.0.
ST-TERM 2.0 has ANSI (VT100 subset) emulation. Pressing the ALT and V
keys will toggle between VT52 and Ansi modes. In ansi modes, ST-TERM
is suitable for use on DEC VAX systems and most other systems expecting
a DEC VT100 terminal. ST-TERM supports the VT100 control set with the
exception of:
Double width / Double height
Bold, Blink, Underscore
LED's
Alternate Character sets
Smooth scrolling
132 column mode
The state of the emulator is saved in the setup file. If no setup file
is loaded, ST-TERM will default to ANSI mode.
Some systems such as Compuserve, allow you to connect at
8 bit even parity, but they output with the high bit set. The
rs232 setup now has a STRIP BIT mode to handle this.
There are now 2 methods of text capture supported by ST-TERM.
From the terminal mode, alt-c and alt-s control the 64K capture
buffer. Alt-S allows you to save captured text to any disk file,
or to the screen or printer.
From the main menu, the C command enable the Capture style ascii
download function. You will be prompted for the name of a DISK
file to save the download file to. Pressing ALT-T from the
terminal mode will activate the text download. Pressing ALT-K will
end the download. Files may be appended by repeating the ALT-T, ALT-K
sequence. Note that the only limit on file size is the amount of
free space on the disk.
ST-TERM now supports Xmodem CRC, Ymodem and Ymodem Batch protocols.
Protocol support is now done from a sub menu after pressing
Receive or Send from the help menu.
Two key commands have been added to the macro key functions.
The character sequence <FF> will send a form feed character.
The character sequence <EC> will send an escape character. This is
very useful when using VAX TPU and you wish to emulate a VT200's
function keys.
Eight additional special keys have been added:
SETTING THE SCREEN COLOR
ST-TERM 2.0 allows you to set the colors for the text and background
colors. These color selections are saved in your setup file. To
cycle through the colors, use the Shift and up cursor key to change
the background color and Shift and left cursor key to change the
text color.